Well it is great to have the girl in the water again.  We splashed Tuesday, April 16th and I motored back to Portland.  Our haul out was quick and we accomplished everything on our list:

Sand and paint bottom with 3 coats WM PCA Gold(Pettit Ultima SR40)
Polish and 2 coats wax on topsides
Repair rudder and skeg
Install new speed, depth, temp transducer
Repack prop log
Install new cutlass bearing
Service prop
Install zincs
New vhf antenna
New wind transducer

Now we wait for the bill.

A big thanks to our friends, the Collins, for putting us up for 10 days while we worked on Carina.

We are now officially on the hard.  We moved Carina up to S. Freeport last Thursday evening with the help of our friend Rodd.  Firday morning Brewers hauled us and set us in the slings for the weekend.  Our list of projects include:
 
Polish/wax the topsides, replace the cutlass bearing, replace the speed transducer, repair the rudder, sand and paint the bottom.
 
Kathy and I worked all weekend and got a great start on the projects.  I did run into a problems with the rudder.  The top bearing is an eccentric hub bearing and was very difficult to remove.  We also found that someone over-bored the strut to accommodate a larger 1.75 inch cutlass bearing.  As a result, the strut has a thinner sidewall. 
I will get a new strut from Buck-Algonquin and keep the old one as an emergency spare for now.
 
Thanks to our friends Rodd and Cara for letting us crash while  the boat is out of the water.